Hose Refrigerant Retainer & Core Depressor Model SF2070, For 1/4" Male Flare

Description

Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Hose Refrigerant Retainer & Core Depressor Model SF2070
Made by, SUPCO (Sealed Unit Parts Company) Brand
PART #:  SF2070
For 1/4" Flare Fittings.
1/4" Female Flare x 1/4" Male Flare.
Hose Gas Retainer and Valve Core Depressor
This awesome little tool is attached to a charging hose, then it is coupled to an access fitting on the system being serviced.
Thumb screw the depressor tip down to depress the valve core and allow gas to flow through the hose.
Increase recovery rates by moving the valve core out of the way.
Thumb screw back to allow the core to shut off.
The depressor tip rod will back seat in a Teflon gasket to retain the gas in the hose.
There will be no loss of the gas in the hose when you disconnect from the access fitting.
Made by, SUPCO (Sealed Unit Parts Company) Brand PART #: SF2070 For 1/4" Flare Fittings. 1/4" Female Flare x 1/4" Male Flare. Hose Gas Retainer and Valve Core Depressor This awesome little tool is attached to a charging hose, then it is coupled to an access fitting on the system being serviced. Thumb screw the depressor tip down to depress the valve core and allow gas to flow through the hose. Increase recovery rates by moving the valve core out of the way. Thumb screw back to allow the core to shut off. The depressor tip rod will back seat in a Teflon gasket to retain the gas in the hose. There will be no loss of the gas in the hose when you disconnect from the access fitting.
Gregoriou Brothers Refrigeration Since 1979
Frosty-Freeze
Hose Refrigerant Retainer & Core Depressor Model SF2070
Made by, SUPCO (Sealed Unit Parts Company) Brand
PART #:  SF2070
For 1/4" Flare Fittings.
1/4" Female Flare x 1/4" Male Flare.
Hose Gas Retainer and Valve Core Depressor
This awesome little tool is attached to a charging hose, then it is coupled to an access fitting on the system being serviced.
Thumb screw the depressor tip down to depress the valve core and allow gas to flow through the hose.
Increase recovery rates by moving the valve core out of the way.
Thumb screw back to allow the core to shut off.
The depressor tip rod will back seat in a Teflon gasket to retain the gas in the hose.
There will be no loss of the gas in the hose when you disconnect from the access fitting.
Made by, SUPCO (Sealed Unit Parts Company) Brand
PART #:  SF2070
For 1/4" Flare Fittings.
1/4" Female Flare x 1/4" Male Flare.
Hose Gas Retainer and Valve Core Depressor
This awesome little tool is attached to a charging hose, then it is coupled to an access fitting on the system being serviced.
Thumb screw the depressor tip down to depress the valve core and allow gas to flow through the hose.
Increase recovery rates by moving the valve core out of the way.
Thumb screw back to allow the core to shut off.
The depressor tip rod will back seat in a Teflon gasket to retain the gas in the hose.
There will be no loss of the gas in the hose when you disconnect from the access fitting.